规格
| 传感器特性 | |
|---|---|
| 名称 | onsemi XGS 45000 CMOS |
| 快门 | Global Shutter |
| 靶面尺寸 | 31.5 mm (Type 2.2″) |
| 分辨率 | 8192 x 5460 px, 44.7 MP |
| 像元尺寸 | 3.2 µm (H) x 3.2 µm (V) |
| 帧率 | 16.0 FPS (16.0 FPS) @ 44.7 MP (8 Bit ADC mode) 12.3 FPS (13.8 FPS) @ 44.7 MP (10 Bit ADC mode) 12.3 FPS (13.8 FPS) @ 44.7 MP (12 Bit ADC mode) |
| 物理特性 | |
|---|---|
| 尺寸 | 55 x 55 x 95.5 mm |
| 镜头接口 | TFL-II Mount |
| 重量 | 304 g |
| 接口和电源信息 | |
|---|---|
| 数据接口 | 10GBASE-T*, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, 100BASE-TX M12, PoE （*10GBASE-T 以短距离模式运行，最大线缆长度为 25 米） |
| Transport Layer Protocol | UDP (GigE Vision), TCP, RDMA (RoCE v2) |
| GPIO Interface | 8 pin M8 connector |
| 路光耦隔离I/O | 1 input, 1 output |
| 路双向可配置非隔离I/O | 2 bi-directional |
| 功率要求 | PoE+ (IEEE 802.3at) or 12-24 V through GPIO |
| 功耗 | <12W via PoE+, 11.5W when powered externally |
*最大帧率基于预留 10% 的设备链路带宽用于数据包重传计算。括号 () 中标注的帧率基于 0% 设备链路带宽预留条件。LUCID 建议预留 10% 带宽以确保数据流传输的可靠性。
| 成像特性 | |
|---|---|
| 图像缓存 | 380 MB |
| Image Processing | Gain, gamma, black level, white balance, LUT, CCM, pixel correction, color space conversion |
| 数据格式 | Mono8/10/12/16, Bayer8/10/12/16, RGB8, BGR8, YCbCr8, YCbCr411, YUV422, YUV411 |
| Image Modes | Horizontal and vertical binning, ROI, Vertical Flip |
| ADC | 12 bit |
| 增益范围 | -1.26 dB to 16.8 dB analog and digital |
| 曝光时间 | 73.328 μs to 10 s |
| 相机功能 | |
|---|---|
| User Sets | 1 default and 2 custom user set |
| File System Size | 16 MB |
| Chunk Data | Image, CRC, histogram stats, timestamp, line status, sequencer set, pixel format, width/height, offset X/Y, pixel dynamic range min/max, gain, black level, exposure time |
| Event Data | Exposure start/end |
| Counter & Timer | 2 counters and 2 timers |
| Sequencer | Exposure time, gain |
| Synchronization | Software trigger, hardware trigger, PTP (IEEE 1588) |
| 标准和认证 | |
|---|---|
| 兼容 | GigE Vision v2.0 |
| 认证 | CE, KC, FCC, RoHS, REACH, WEEE |
| 存储温度 | -30 to 60°C |
| 工作温度 | -20 to 50°C ambient |
| 湿度 | Operating: 20% ~ 80%, relative, non-condensing |
| 冲击和振动标准 | DIN EN 60068-2-27, DIN EN 60068-2-64 |
| 保修 | 3 year |
